The folks at Bitwig have been picking up speed. And version 2.4, beta testing now, brings some promising sampler and controller features.
The big deal here is that Bitwig is going with a full-functioning sampler. And as Ableton Live and Native Instruments’ Maschine pursue somewhat complex and fragmented approaches, maybe Bitwig will step in and deliver a sampler that just does all the stuff you expect in one place. (I’m ready to put these different devices head to head. I like to switch workflows to keep fresh, anyway, so no complaints. Bitwig just wins by default on Linux since Ableton and NI don’t show up for the competition. Ahem.)
Meet the new Sampler: manipulate pitch, time, and the two in combination, either together in a traditional fashion or independently as a digital wavetable or granular instrument. Those modes on their own aren’t new, but this is a nice way of combining everything into a single interface.
The re-built Sampler introduces a powerful wavetable/granular instrument. At its heart are multiple modes that combine effectively different instruments and ways of working with sound into a single interface:
“Repitch” / Speed + pitch together: The traditional sampler mode, with negative speeds, too (allowing it to behave the way a record player / record-scratch / tape transport does).
“Cycles” / Speed only: Speed changes, pitches stay the same. There’s also a Formant control, and the ability to switch on and off keyboard tracking. (In other words, you can scale from realistic-sounding speed changes to extreme metallic variations.)
“Textures” / Granular resampling / independent pitch and speed: Granular resynthesis divides up the sound into tiny bits allowing independent pitch and time manipulation (in combination), and textural effects. Independent speed, grain size, and grain motion (randomization) are all available as parameters.
Freeze: Each mode lets you directly manipulate the sample playhead live, using a controller or the Bitwig modulators. That emulates the position of a needle on a record or playhead on a tape, or the position in a granular playback device, depending on mode – and this is in every single mode.
Oh. Okay. Yeah, so those last two are to me the way Ableton Live should have worked from the beginning – and the way a lot of Max, Reaktor, Pd, and SuperCollider patches/code might work – but it’s fantastic to see them in a DAW. This opens up a lot of live performance and production options. If they’ve nailed it, it could be a reason to switch to Bitwig.
But there’s more:
Updated Multisampler Editor: Bitwig’s Sampler already had multisampler capabilities – letting you combine different samples into a single patch, as you might do for a complex instrument, for instance. Now, you can make groups, choose more easily what you see when editing (revealing samples as you play, for instance), and set modulation per zone. There’s also ping-pong looping and automatic zero-crossing edits (so you can slice up sounds without getting pops and clicks).
Multi-sample mode lets you work with zones in new ways, for more complex sampling patches.
There’s a new device that lets you step sequence modulation. Here’s how they describe that:
ParSeq-8 is a step sequencer for modulation.
ParSeq-8 is a unique parameter modulation sequencer, where each step is its own modulation source. It can use the project’s clock, advance on note input, or just run freely in either direction. As it advances, each step’s targets are modulated and then reset. It’s a great way to make projects more dynamic, whether in the studio or on the stage. (Along the way, our Steps modulator got some improvements such as ping-pong looping so check it out too.)
Also in the modulation category, there’s a Note Counter — count up each incoming note and create cycles of modulation as a result.
Note FX Layer.
More powerful with controllers
Bitwig has been moving forward in making it easy to map hardware controls to software, even as rival tools (cough, Ableton) haven’t advanced since early versions. That’s useful if you have a particular custom hardware controller you want to use to manipulate the instruments, effects, and mixing onscreen.
Now there’s a new visualization to give you clear onscreen feedback of what you’re doing, making that hardware/software connection much easier to see.
Visualize controllers as you use them – so the knob you turn on your hardware makes something visible onscreen.
There’s also MIDI channel support. MIDI has had channels since the protocol was unveiled in the 80s – a way of dividing up multiple streams of information. Now you can put them to use: incoming MIDI can be mapped and filtered by channel. That’s … not exciting, okay, but there are dedicated devices for making those channels useful in chains and so on. And that is fairly exciting.
MIDI channel support – essential for working with MIDI, but implemented here in a way that’s powerful for manipulating streams of control and information.
And more stuff
Also in this release:
Bit-8 audio degrader gets new quantization and parameters for glitching or lightly distorting sound
Note FX layer creates parallel note effects
There’s more feedback in the footer of the screen when you hover over parameters/values
Resize track widths, scene widths
Looks like a great upgrade. Beta testing starts soon, to be followed by a release as a free upgrade for Upgrade Plan users this summer.
The post Bitwig Studio 2.4: crazy powerful sampler, easier control appeared first on CDM Create Digital Music.
from CDM Create Digital Music cdm.link/2018/07/bitwig-studio-2-4-sampler-control/