Tag: CNXSoft – Embedded Systems News

CompuLab UCM-iMX8M-Mini is a Stamp Size i.MX 8M Mini SoM

We’ve recently written about several new hardware platforms based on the latest NXP i.MX 8M Mini processor family including Nitrogen8M_Mini SBC and F&S Elektronik PicoCore MX8MM SoM. Thanks… from CNXSoft – Embedded Systems News www.cnx-software.com/2019/02/20/ucm-imx8m-mini-stamp-size-i-mx-8m-mini-som/ via IFTTT

Tanix TX6 Allwinner H6 TV Box Gets Android 9.0 Firmware

The first Android 9.0 TV boxes appeared a few months ago in some Rockchip RK3328 based models, Amlogic also showcased Android 9 Pie in S905X2 / S905Y2 TV box reference platforms, but so far I… from CNXSoft – Embedded Systems News www.cnx-software.com/2019/02/20/tanix-tx6-tv-box-allwinner-h6-android-9-0-firmware/ via IFTTT

Qualcomm Announces Snapdragon X55 Second Generation 5G Modem

Several 5G smartphones based on Snapdragon 855 processor and Snapdragon X50 5G modem have been announced, but AFAIK none have shipped to end users. But Qualcomm has already announced their second… from CNXSoft – Embedded Systems News www.cnx-software.com/2019/02/20/qualcomm-snapdragon-x55-second-generation-5g-modem/ via IFTTT

Design your own NAS with $25 4x SATA HAT for NanoPi M4 Board

NanoPi M4 is one of the many Rockchip RK3399 boards available on the market today. The SBC follows Raspberry Pi form factor, comes with 2 to 4 GB RAM, four USB 3.0 ports, Gigabit Etherent, HDMI 2.0,… from CNXSoft – Embedded Systems News www.cnx-software.com/2019/02/19/4x-sata-hat-nanopi-neo-m4-nas/ via IFTTT

Geniatech DB3399Pro RK3399Pro Development Board Comes with 8 USB Interfaces

Rockchip RK3399Pro is an upcoming processor based on Rockchip RK3399 hexa-core processor, but adding RK1808 NPU block for AI workloads. We’ve already seen a few development boards based on the… from CNXSoft – Embedded Systems News www.cnx-software.com/2019/02/18/geniatech-db3399pro-rk3399pro-development-board-usb-interfaces/ via IFTTT

This $4 PWM Signal Generator Outputs Pulses up to 150 KHz

When I think about signals generators, I usually think about equipment that costs several hundred dollars, but depending on your needs you could also use much cheaper solutions like PSLab electronics… from CNXSoft – Embedded Systems News www.cnx-software.com/2019/02/18/cheap-pwm-signal-generator/ via IFTTT

$200 Omega2 WiFi LIDAR Kit Comes with a 360˚ 2D LIDAR Scanner

Onion Omega2 is a tiny WiFi board running OpenWrt that launched for as low as $5 via a crowdfunding campaign around 2 years ago, and at the time I reviewed Onion Omega2+ board – which comes… from CNXSoft – Embedded Systems News www.cnx-software.com/2019/02/18/omega2-wifi-lidar-kit-360-2d-lidar/ via IFTTT